PRODUCT

Fireproof Filler

Fireproof Putty [MG-191]

Image of Fireproof Putty(MAGA PUTTY)
Product Information

It is a fireproof acrylic product. It has excellent flexibility, adhesive strength, elasticity, and water resistance. It shows excellent adhesion with evaporation of water. Additionally, it has the unique elasticity (resilience) and fireproof performance, and can actively respond to the structure in the event of displacement in penetration areas in the curtain walls in the fire protection zone.

Physical Properties

Technical Date: Based on 20 ℃, relative humidity 60%

Main components Acrylic emulsion
Appearance Red
PH 7 ∼ 9
Flammability None
Curing time More than 3 days (2mm wet)
Service temperature 5 ~ 40℃
Features
  • Excellent smoke and moisture insulation
  • Excellent heat resistance
  • Excellent water repellency
  • Soluble emulsion products free from toxic and harmful substances
  • Excellent elongation and adhesion
Usage
  • It seals the curtain wall penetration area in the fire protection zone
  • It seals the curtain wall penetration area in the fire protection zone of apartment, residential complex, department store, plant building, etc.
Standard working conditions
Standard temperature
in the workplace
15 ∼ 35℃
Standard humidity
in the workplace
50 ∼ 75%
Lowest storage
temperature
2℃
How to use
  • Remove dirt and moisture from the surface to which the product will be applied.
  • Apply masking tape to prevent staining in the surrounding areas.
  • Apply the product with a constant thickness to the surface of the sealing material in the fire protection zone.
  • Remove masking tape cleanly after applying the product.
  • Conduct finishing work immediately after construction, and wipe off excess material immediately.
Consumption
Width(mm) Both sides 10mm Over lap Construction Length when 19 liters is used (m)
50 75 80
75 100 60
100 125 50
150 175 40
200 225 35

* Depending on the surface condition, the consumption may vary.

Precautions for use
  • The curing time may vary depending on the working environment (temperature, humidity, water content of wood, amount of application, etc.).
  • After opening the product, please seal it for reusing it later.
  • Because it is a water-soluble product, please keep it from freezing during winter.
  • If the temperature is higher than the ambient temperature, it may change the properties of product and degrade the workability and adhesion of the product during application.
  • Because this product is a water-soluble product, be sure not to use frozen products or work below 0 ℃. We are not responsible for any damage to property caused due to the above reasons.
  • Avoid contact until the coatings are completely cured and take care to prevent damages to the product due to contamination (rain, dust, etc.) or impact.

※ This data is the general product information provided to help consumers to work as much as possible.
Please contact us if you need any specific data or have inquiries about the product.